content top




Homepage table

Shipping Specials

We are pleased to offer special low cost shipping rates of $9.00 for ground or $23 for 2nd day. This is for your entire order! Sorry, this offer excludes Waterproof Charts, Bennett replacement TPA, TPO and MP's, Icettes, water heaters or any wood furniture. Shipping charges will be adjusted when credit card is processed. Offer valid for lower 48 states only.

VineyardMart
364 E. Main St
Suite 311
Middletown, DE 19709

Phone: 240-389-BOAT

Phone: 240-389-2628


Join our mailing list!







You are here: Home > Marine Plumbing and Heating > Engine Compartment Heaters > BoatSafe Engine Compartment Heaters

Features and Benefits
Engine Compartment Heaters

"Eliminate the bother and expense of winterizing your engine(s)."

Engineered to rigid and demanding specifications to provide years of
dependable and trouble free service.


Extend Your Boating Season - Use your boat when you want to, not when weather dictates.

Complete Safety - No sparks which could ignite combustible vapors.
(Conventional space heaters, and light bulbs, are totally unsafe for an engine compartment because of the danger of sparks igniting vapors.)

The BoatSafe BSAT- 750 Watts of Forced Air Heat - Utilizes a dependable, computer style fan for heat distribution. (For engine compartments up to 650 cu.ft.) This size heater unit is required for any boat that is stored out of the water on a lift, or on a trailer.

The BoatSafe Jr. - 250 Watts of Forced Air Heat - Designed for smaller engine compartment applications. (For engine compartments up to 150 cu.ft.) This heater unit will not provide adequate protection for a boat that is stored out of the water on a lift, or on a trailer.

BSAT & Jr. - Automatic Thermostat - Factory calibrated and pre-set to activate at 45°F (approx). Thermostat is an integral component of heater unit.

Both Models operate on 120 Volt Shore Power*, or Gen-Set Power.

*Any electrical device does require a consistent and dependable source of power to operate efficiently.

Easy to Install - Can be mounted in any position, or at any angle in the engine compartment, except upside down under the deck.

Dimensions -
750 Watt Model 6.5" H x 6.5" W x 21" L - 2" Mounting Brackets.
250 Watt Model 5.5" H x 4.5" W x 14.5" L - 1" Mounting Brackets.

Economical to Use -
750 Watt Model - Cost 6˘/Hr. of operation.
250 Watt Model - Cost 2˘/Hr. of operation.
(Based on average electricity cost of 8˘/KWH)

Helps Keep Engine(s) and Wiring Dry and Corrosion Free.

Helps Extend Battery Life - Allows batteries to deliver full starting power in cold weather.

Enhances the Resale Value of Your Boat - An installed BoatSafe®
increases your boat's value.

Saves Money by Eliminating the Annual Costs of Winterizing & Dewinterizing your engine(s) in some climates.

The BoatSafe® Marine Engine Compartment Heaters are designed and manufactured to meet U.S. Coast Guard Ignition Protection Standards.

Constructed with UL and CSA Certified and Recognized, and FM Approved Components.

Full One Year Warranty, plus a "Lifetime Service Guarantee".