Search:

Shipping Specials

We are pleased to offer special low cost shipping rates of $9.00 for ground or $23 for 2nd day. This is for your entire order! Sorry, this offer excludes Waterproof Charts, Bennett replacement TPA, TPO and MP's, Icettes, water heaters or any wood furniture. Shipping charges will be adjusted when credit card is processed. Offer valid for lower 48 states only.

VineyardMart 364 E. Main St Suite 311 Middletown, DE 19709 Phone: 240-389-BOAT Phone: 240-389-2628

Join our mailing list!

Home > Trim Tabs > Lenco Trim Tab Parts >   Lenco Replacement Electric Actuators
	Availability:: Usually Ships in 24 to 48 Hours Product Code: LENCOACTUATORS LencoActuators*: Lenco 101 Standard Actuator - 12v - 2 1/4" Stroke [Add $169.00] Lenco 101 Standard Actuator - 24v - 2 1/4" Stroke [Add $200.00] Lenco Extreme Duty Actuator - 12v - 2 1/4" Stroke - 5/16" Hardware [Add $202.00] Lenco Extreme Duty Actuator - 12v - 2 1/4" Stroke - 3/8" Hardware [Add $202.00] Lenco Extreme Duty Actuator - 24v - 2 1/4" Stroke - 5/16" Hardware [Add $240.00] Lenco Extreme Duty Actuator - 24v - 2 1/4" Stroke - 3/8" Hardware [Add $240.00] Lenco 102 Actuator - 12v - 4 1/4" Stroke [Add $190.00] Lenco Extreme Duty Acuator - 12v - 4 1/4" Stroke [Add $225.00] Lenco Extreme Duty Acuator - 24v - 4 1/4" Stroke [Add $260.00]

Description   101 Standard Actuator Included in Standard Trim Tab Kit, Standard Performance Tab Kit, SeaDoo Kit, and Bennett Retrofit Kit 5/16" (.79 cm) mounting hardware Stroke: 2-1/4" (5.72 cm) Length overall: 12-1/8" (30.80 cm) Length pin to pin: 11-1/2" (29.21 cm) Diameter (upper housing): 2-1/2" (6.35 cm) Mounting hardware: 5/16" ( .79 cm) or Delrin Pin (Part #121) Part # (Superseded #) #15054-001 (101-2), 12 or 24 Volt w/6' (1.83 cm) cable with Deutsch connector (replacement length) Top cap gland seal sheaths the actuator cable outer jacket as well as both internal conductors for maximum waterproofing Corrosion proof Vandar mounts Stainless steel ram won?t flex, even under extreme loads Double O-ring for maximum protection Ballscrew rotates freely on 12 ball bearings at both ends of its stroke so there?s no need for complicated limit switches and clutches Self-locking ballscrew locks into position and will not drift Precision molded, powdered metal, high alloy gears provide high accuracy, high wear resistance, and high strength for long life Tough, high-torque motor easily transfers 750 lbs High-impact, ultraviolet resistant nylon 66, 50% glass fiber reinforced thermoplastic housing Corrosion proof Vandar cap and mount, stands up to severe loads 101 XD Extreme Duty Actuator with 5/16" Mounting Hardware Part # (Superceded #) #15055-001 (101 XD-5) 12 or 24 Volt w/6' (1.83 m) leads with Deutsch connectors 5/16" (.79 cm) mounting hardware, solid stainless steel billet end Included in Heavy Duty PerformanceTab Kits Stroke: 2-1/4" (5.72 cm) Length overall: 11-3/8" (28.89 cm) Length pin to pin: 10-3/4" (27.31) Diameter (upper housing): 2-1/2" (6.35 cm) Top cap gland seal sheaths the actuator cable outer jacket as well as both internal conductors for maximum waterproofing Corrosion proof Vandar mounts Stainless steel ram won?t flex, even under extreme loads Double O-ring for maximum protection Ballscrew rotates freely on 12 ball bearings at both ends of its stroke so there?s no need for complicated limit switches and clutches Self-locking ballscrew locks into position and will not drift Precision molded, powdered metal, high alloy gears provide high accuracy, high wear resistance, and high strength for long life Tough, high-torque motor easily transfers 750 lbs High-impact, ultraviolet resistant nylon 66, 50% glass fiber reinforced thermoplastic housing Corrosion proof Vandar cap and mount, stands up to severe loads 101 XD Extreme Duty Actuator with 3/8" Mounting Hardware Part # (Superceded #) #15056-001 (101 XD-7) 12 or 24 Volt w/6' (1.83 m) leads with Deutsch connectors, 3/8" (.95 cm) mounting hardware, solid stainless steel billet end Included in Extreme Duty Performance Kits and Super Strong Kits Stroke: 2-1/4" (5.72 cm) Length overall: 11-3/8" (28.89 cm) Length pin to pin: 10-3/4" (27.31) Diameter (upper housing): 2-1/2" (6.35 cm) Top cap gland seal sheaths the actuator cable outer jacket as well as both internal conductors for maximum waterproofing Corrosion proof Vandar mounts Stainless steel ram won't flex, even under extreme loads Double O-ring for maximum protection Ballscrew rotates freely on 12 ball bearings at both ends of its stroke so there's no need for complicated limit switches and clutches Self-locking ballscrew locks into position and will not drift Precision molded, powdered metal, high alloy gears provide high accuracy, high wear resistance, and high strength for long life Tough, high-torque motor easily transfers 750 lbs High-impact, ultraviolet resistant nylon 66, 50% glass fiber reinforced thermoplastic housing Corrosion proof Vandar cap and mount, stands up to severe loads 102 Actuator Used with Troll'n Tab Kits prior to 2000 5/16" (.79 cm) mounting hardware Stroke: 4-1/4" (10.8 cm) Length overall: 14" (35.56 cm) Length pin to pin: 13" (32.87 cm) Diameter (upper housing): 2-1/2" (6.35 cm) Mounting hardware: 5/16" (.79 cm) or Delrin Pin (Part #15087-001) Part # (Superceded #) # 15059-001 (102-2) 12 or 24 Volt w/6' (1.83m) leads with Deutsch connectors (replacement length) Top cap gland seal sheaths the actuator cable outer jacket as well as both internal conductors for maximum waterproofing Corrosion proof Vandar mounts Stainless steel ram won't flex, even under extreme loads Double O-ring for maximum protection Ballscrew rotates freely on 12 ball bearings at both ends of its stroke so there's no need for complicated limit switches and clutches Self-locking ballscrew locks into position and will not drift Precision molded, powdered metal, high alloy gears provide high accuracy, high wear resistance, and high strength for long life Tough, high-torque motor easily transfers 750 lbs High-impact, ultraviolet resistant nylon 66, 50% glass fiber reinforced thermoplastic housing Corrosion proof Vandar cap and mount, stands up to severe loads   102 XD Actuator Used with Troll?n Tab Kits prior to 2000 5/16" (.79 cm) mounting hardware Stroke: 4-1/4" (10.8 cm) Length overall: 12-7/8" (32.70 cm) Length pin to pin: 12-1/4" (31.11 cm) Diameter (upper housing): 2-1/2" (6.35 cm) Mounting hardware: 5/16" (.79 cm) or Delrin Pin (Part #15087-001) Part # #15060-001 (102-2) 12 or 24 Volt w/6' (1.83m) leads with Deutsch connectors (replacement length) Top cap gland seal sheaths the actuator cable outer jacket as well as both internal conductors for maximum waterproofing Corrosion proof Vandar mounts Stainless steel ram won't flex, even under extreme loads Double O-ring for maximum protection Ballscrew rotates freely on 12 ball bearings at both ends of its stroke so there's no need for complicated limit switches and clutches Self-locking ballscrew locks into position and will not drift Precision molded, powdered metal, high alloy gears provide high accuracy, high wear resistance, and high strength for long life Tough, high-torque motor easily transfers 750 lbs High-impact, ultraviolet resistant nylon 66, 50% glass fiber reinforced thermoplastic housing Corrosion proof Vandar cap and mount, stands up to severe loads

Related Products... AQUALUMA Trim Tab Light Our Price: $329.95 Add Lenco Replacement Blades Add

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item: Trim Tabs > Lenco Trim Tab Parts Replacement Parts > Trim Tabs Trim Tabs Replacement Parts

	Teak Wood Beach Lounger $179.95
	Ritchie Bulkhead Mounted Compasses
	Standard Horizon HX270S Handheld VHF Radio $89.95
	Davis Vantage Pro2 Plus™ Weather Station w/ Standard Radiation Shield - Davis 6162/6162C $805.00
	Bennett Trim Tabs Kit 42 X 12" With Euro Rocker Switch $609.95
	Replacement Batteries for Standard Horizon Handheld Radios
	Cannon Mag 20 DT/TS Tournament Series Electric Downrigger $1,099.99
	Bennett Trim Tabs Kit 48 X 12" With Euro Rocker Switch $739.95
	Boat Leveler 18 X 8" Trim Tab Kit N188000 Insta Trim for Boats 18'-24' $409.95